Brand |
Cisco |
Product Line |
Cisco Catalyst |
Model |
2960XR-48TD-I |
Manufacturer |
CISCO DS HARDWARE DIRECT |
Clock Speed |
600 megahertz |
Processor Brand |
ARM |
Processors Installed |
1 |
Flash Memory Installed |
128 megabyte |
RAM Installed |
512 megabyte |
Advanced Switching |
Layer 3 |
Compliant Standards |
IEEE 802.1ab (LLDP), IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3ah, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
Features |
Access Control List (ACL) support, ARP support, Auto-negotiation, Auto-uplink (auto MDI/MDI-X), Broadcast Storm Control, Cisco Fast EtherChannel, Class of Service (CoS), DHCP snooping, Dynamic ARP Inspection (DAI), Dynamic Trunking Protocol (DTP) support, Energy Efficient Ethernet, IGMP snooping, IPv6 support, Layer 2 switching, Layer 3 load balancing, Link Aggregation Control Protocol (LACP), MLD snooping, Multicast Storm Control, Multicast VLAN Registration (MVR), Multiple Spanning Tree Protocol (MSTP) support, Per-VLAN Rapid Spanning Tree (PVRST), Port Aggregation Protocol (PAgP) support, Quality of Service (QoS), RADIUS support, Rapid Spanning Tree Protocol (RSTP) support, Remote Switch Port Analyzer (RSPAN), Shaped Round Robin (SRR), Strict Priority Queuing (SPQ), Trivial File Transfer Protocol (TFTP) support, Unicast Storm Control, Uni-Directional Link Detection (UDLD), VLAN support |
Form Factor (Hubs & Switches) |
Desktop, Rack-mountable |
Jumbo Frame Support |
9216 bytes |
Manageable |
Yes |
Max Units In A Stack |
8 |
Ports |
48 |
Product Type |
Switch |
Remote Management |
CLI, HTTP, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 1, SNMP 2, SNMP 2c, SNMP 3, SSH, Telnet |
Routing Protocol |
HSRP, OSPF, PIM-DM, PIM-SM, PIM-SSM, Policy-based routing (PBR), RIP-1, RIP-2, RIPng, VRRP |
Stackable |
Stackable |
Status Indicators |
Link/activity, Port duplex mode, Port status, Port transmission speed, System |
Subcategory |
Network hubs and switches |
Switching Type |
Gigabit Ethernet |
Interface Provided |
1 x console RJ-45, 1 x management (LAN) RJ-45, 1 x USB Type A, 1 x USB Type B, 2 x SFP+, 48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 |
Port Quantity |
48 |
Port Type |
10/100/1000 |
Ports Type (2nd) |
SFP+ |
Frequency |
50/60 hertz |
Hot-Plug |
Hot-plug |
Power Provided |
250 watt |
Power Supplies Installed |
1 |
Power Supplies Supported |
2 |
Redundant Power Supply |
Yes |
Redundant Power Supply Supported |
1+1 |
Software Type |
Cisco IOS IP Lite |
Humidity Range Storage |
10 - 95% (non-condensing) |
Max Operating Temperature |
113 degree Fahrenheit |
Max Storage Temperature |
158 degree Fahrenheit |
Min Operating Temperature |
23 degree Fahrenheit |
Min Storage Temperature |
-13 degree Fahrenheit |
MTBF |
440,880 Hours |
Operating Humidity |
10 - 95% (non-condensing) |
Authentication Method |
RADIUS, Secure Shell (SSH), TACACS+ |
Capacity |
Virtual interfaces (VLANs): 1023 |
Device Type |
Internal power supply |
Packaged Quantity |
1 |
Performance |
Forwarding performance: 130.9 Mpps, Switching capacity: 216 Gbps |
Ports (2nd) Quantity |
2 |
Height |
1.8 inch |
Height (Rack Units) |
1 |
Weight |
13.45 lbs |
Width |
17.5 inch |
Depth |
16.1 inch |
Compliant Standards |
BSMI CNS 13438 Class A, CB, CISPR 22 Class A, CISPR 24, CSA C22.2 No. 60950-1, EN 300 386, EN 60950-1, EN 61000-3-2, EN 61000-3-3, EN55022 Class A, EN55024, FCC Part 15 A, ICES-003 Class A, IEC 60950-1, KN22, KN24, RoHS, UL 60950-1 Second Edition, VCCI Class A |
ENERGY STAR Certified |
No |