The Cisco IE-3010-16S-8PC is a fully managed Layer 2 rack-mountable fixed configuration switch designed for industrial environments. It belongs to the Cisco Industrial Ethernet 3010 Series, known for its durability and features optimized for industrial applications.
Here are its key specifications:
-
Ports:
- 16 x 100/1000/10BASE-T Gigabit Ethernet ports: These ports provide high-speed data transfer capabilities for industrial devices.
- 8 x PoE (Power over Ethernet) ports: These ports can deliver power to compatible devices like IP cameras or VoIP phones over the Ethernet cable, eliminating the need for separate power supplies.
- 2 x SFP uplink ports: These ports allow you to connect the switch to higher-speed networks using SFP transceivers (sold separately).
-
Managed Layer 2 Switch: Offers advanced configuration and management capabilities through a web interface or command-line interface (CLI).
-
Industrial Design: Built to withstand harsh environments with extended operating temperature range (-40°C to 70°C), shock and vibration resistance, and dust and moisture protection.
-
Security Features: Supports various security features like port security, access control lists (ACLs), and Secure Shell (SSH) for secure management.
Overall, the Cisco IE-3010-16S-8PC is a robust switch suitable for industrial environments where reliability, performance, and PoE capabilities are crucial. However, it's important to consider that Cisco has potentially phased out this product series.
Here are some additional points to keep in mind:
- End-of-Life (EOL) Status: While exact dates may vary by source, it appears Cisco likely ended hardware support for the IE-3010 series around March 31, 2026. Software updates and bug fixes likely stopped even earlier.
- Alternatives: If you're looking for a new switch, consider newer Cisco Industrial Ethernet models or explore offerings from other vendors that cater to industrial applications.
If you currently have an IE-3010-16S-8PC and need information on troubleshooting or configuration, you might still find helpful resources from third-party vendors or IT communities. But for critical deployments, it's advisable to consider migrating to a supported switch model for ongoing support and security updates.
| Brand | Cisco |
| Product Line | Cisco Industrial Ethernet |
| Model | 3010 Series |
| Flash Memory Installed | 1 GB |
| Memory Technology | DDR2 SDRAM |
| RAM Installed | 256 megabyte |
| Compliant Standards | IEEE 802.1ab (LLDP), IEEE 802.1ag, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3af, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Features | Access Control List (ACL) support, Broadcast Storm Control, DHCP snooping, DHCP support, Dynamic ARP Inspection (DAI), IGMP snooping, Jumbo Frames support, MAC address filtering, MLD snooping, Multicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, Quality of Service (QoS), Rapid Spanning Tree Protocol (RSTP) support, Spanning Tree Protocol (STP) support, Unicast Storm Control, VLAN support |
| Form Factor (Hubs & Switches) | Rack-mountable |
| Jumbo Frame Support | 9018 bytes |
| MAC Address Table Size | 12K entries |
| Manageable | Yes |
| Power Over Ethernet (PoE) | PoE |
| Product Type | Switch |
| Remote Management | HTTP, HTTPS, SNMP 1, SNMP 2, SNMP 3, SSH-2, Telnet |
| Subcategory | Network hubs and switches |
| Switching Type | Gigabit Ethernet |
| Expansion Slots | 1 (total) / 0 (free) x SD Memory Card |
| QSFP Slots | Combo Gigabit SFP |
| Interface Provided | 1 x alarm - RJ-45, 1 x console - mini-USB Type B management, 1 x console RJ-45 management, 18 x SFP (mini-GBIC), 2 x 1000Base-T RJ-45, 8 x 1000Base-T RJ-45 PoE |
| Port Quantity | 16 |
| Port Type | 100 Mbit SFP |
| Ports Type (2nd) | 10/100/1000 |
| Hot-Plug | Hot-plug |
| Power Supplies Supported | 2 |
| Redundant Power Supply | Optional |
| Software Type | Cisco IOS LAN Base |
| Humidity Range Storage | 5 - 95% (non-condensing) |
| Max Operating Temperature | 140 degree Fahrenheit |
| Max Storage Temperature | 185 degree Fahrenheit |
| Min Operating Temperature | -40 degree Fahrenheit |
| Min Storage Temperature | -40 degree Fahrenheit |
| MTBF | 230,112 Hours |
| Operating Humidity | 5 - 95% (non-condensing) |
| Authentication Method | RADIUS, Secure Shell v.2 (SSH2), TACACS+ |
| Capacity | Active VLANs: 255 |
| Device Type | Internal power supply (not installed) |
| Packaged Quantity | 1 |
| Performance | Forwarding performance (64-byte packet size): 6.5 Mpps |
| Ports (2nd) Quantity | 8 |
| Ports (3rd) Quantity | 2 |
| Rack Mounting Kit | Included |
| Height | 1.8 inch |
| Height (Rack Units) | 1 |
| Weight | 9.92 lbs |
| Width | 17.5 inch |
| Depth | 14 inch |
| Compliant Standards | AS/NZS 3548 Class A, BSMI CNS 13438 Class A, CB, CISPR 11, CISPR 22, CISPR 24, CSA 22.2 No. 142, EN 300 386, EN 60950-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 61000-6-4, EN 61131-2, EN 61326-1, EN55022, EN55024, FCC Part 15 A, IEC 60529 IP20, IEC 60950-1, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, KCC, NOM, UL 508, UL 60950-1, VCCI Class A ITE |